These image galleries contain photos taken while performing our inspections. They show examples of why you should have a ProSpec Home Inspection performed.
Attic access is limited without a pull-down
Attic insulation recommended in the
NE region is R30 (min.), or 8 inch
height for blown-in cellulose as
in this case.
Interior wall crack outward from door corner
is another indication of differential settlement.
Water stains on roof boards caused by
defective roof edge flashing.
Black mold on roof rafters caused by
moisture and a lack of attic ventilation.
This mold can be toxic and should
be addressed. Recommend providing
adequate attic ventilation via soffit/
gable vents and adding an attic
Defective attic ventilation fan did not start